Class 1 Ball Mounts

A ball mount also called a 'stinger' or drawbar is a square steel tube with a thick mounting plate which the trailer ball is mounted to. Ball mounts are made to change quickly to adapt to various towing needs by means of a special pin or locking device.

Curt Class I ball mounts shown below can support trailers up to 2,000 lb gross trailer weight/200 lb tongue weight and are protected with a durable gloss powder coat finish and fit the standard 1 1/4" square receiver tube.

Class 1 trailers are small and lightweight they often include small utility. jet ski and motorcycle trailers and can be pulled by most vehicles including many subcompact cars. Bike racks and cargo boxes are also supported in this class.

Information necessary to determine the correct ball mount for your application:
  • Rise or Drop. The amount of distance below or above the receiver tube that will make allow the towing vehicle and towed trailer to connect and travel level.
  • Length. The length required to extend the tow ball from the vehicle. Do not extend more than necessary for sufficient clearance.
Class I Ball Mount 6 3/4 Long 1.25 Drop 5/8 Rise 1.25" Receiver

Class I Ball Mount 6 3/4 Long 1.25 Drop 5/8 Rise 1.25" Receiver

Class 1 hollow ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 6 3/4" GTW/TW: 2,000/200 lbs. Drop: 1 1/4" Rise: 5/8"...
45018
$13.71 Online
Add:
Class I Ball Mount 9 3/4 Long 1.25 Drop 5/8 Rise 1 1/4" Receiver

Class I Ball Mount 9 3/4 Long 1.25 Drop 5/8 Rise 1 1/4" Receiver

Class 1 hollow ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 9 3/4" GTW/TW: 2,000/200 lbs. Drop: 1 1/4" Rise: 5/8"...
45019
$14.09 Online
Add:
Class I Ball Mount 9 1/2 Long 3" Rise 1 1/4" Receiver

Class I Ball Mount 9 1/2 Long 3" Rise 1 1/4" Receiver

Class 1 solid ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 9 1/2" GTW/TW: 2,000/200 lbs. Drop: N/A Rise: 3" Hole...
45021
$19.36 Online
Add:
Class I Ball Mount 7 1/4 Long 3 1/4 Drop 2 5/8 Rise 1 1/4" Rcvr.

Class I Ball Mount 7 1/4 Long 3 1/4 Drop 2 5/8 Rise 1 1/4" Rcvr.

Class 1 hollow ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 7 1/4" GTW/TW: 2,000/200 lbs. Drop: 3 1/4" Rise: 2 5/8"...
45022
$14.95 Online
Add:
Class I Ball Mount 11 1/2 Long 3 3/4 Rise 1 1/4 Receiver

Class I Ball Mount 11 1/2 Long 3 3/4 Rise 1 1/4 Receiver

Class 1 solid ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 11 1/2" GTW/TW: 2,000/200 lbs. Drop: N/A Rise: 3 3/4"...
45023
$20.80 Online
Add:
Class I Ball Mount 9 9/16 Long 5" Rise 1 1/4" Receiver

Class I Ball Mount 9 9/16 Long 5" Rise 1 1/4" Receiver

Class 1 solid ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 9 9/16" GTW/TW: 2,000/200 lbs. Drop: N/A Rise: 5" Hole...
45024
$20.68 Online
Add:
Class I Ball Mount 9 3/8 Long 3 1/4 Drop 2 5/8 Rise 1 1/4" Rcvr

Class I Ball Mount 9 3/8 Long 3 1/4 Drop 2 5/8 Rise 1 1/4" Rcvr

Class 1 hollow ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 9 3/8" GTW/TW: 2,000/200 lbs. Drop: 3 1/4" Rise: 2 5/8"...
45026
$14.78 Online
Add:
Class I Ball Mount 6 1/4 Long 3 1/4 Drop 2 5/8 Rise 1 1/4" Rcvr

Class I Ball Mount 6 1/4 Long 3 1/4 Drop 2 5/8 Rise 1 1/4" Rcvr

Class 1 hollow ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 6 1/4" GTW/TW: 2,000/200 lbs. Drop: 3 1/4" Rise: 2 5/8"...
45027
$13.71 Online
Add:
Class I Ball Mount 5 9/16 Long 6 Drop 4 5/8 Rise 1 1/4" Receiver

Class I Ball Mount 5 9/16 Long 6 Drop 4 5/8 Rise 1 1/4" Receiver

Class 1 solid ball mount with durable gloss powder coat finish. Receiver Tube: 1 1/4" x 1 1/4" Length: 5 9/16" GTW/TW: 2,000/200 lbs. Drop: 6" Rise: 4 5/8"...
45028
$19.01 Online
Add:

Who's Online

There currently are 32 guests online.
Your IP Address is: 54.225.28.32
Copyright © 2017 Humphreys Hitch And Trailer Parts Hitch Div